content is empty!
Oral mirror: | |
---|---|
Dental probe: | |
Dental tweezers: | |
Bib: | |
Tray: | |
Availability: | |
Quantity: | |
CNME080709
CNMEDITECH
Scope of application:
For medical staff for the diagnosis and treatment of stomatology patients.
Usage:
1.After opening the package, remove the various devices in this product.
2.Take appropriate instruments for diagnosis, treatment of the oral cavity, and protection of patients and medical staff.
Product performance:
1.Oral mirror:The surface should be smooth, without front edge, burrs, cracks, the mirror should be smooth and clean, the image without obvious deformation phenomenon. The handle and lens should be firmly connected without loosening phenomenon. The dimensions shall be ± 20% of the nominal value.
2.Dental probe:The maximum size and total length should not be greater than 178mm. The surface of the external tooth probe handle should be smooth, without impurities, spots and cracks. The tooth probe tip should be smooth and without burr. The probe tip of the firm teeth should be firmly connected to the handle.
3.Dental tweezers:The size shall be ± 20% of the nominal value. The appearance should be smooth, without impurities, without obvious injection defects. Solid tweezers body and tweezers tip should be firmly connected. After stressing the middle of the dental forceps,the forceps tip should match each other.
4.Bib:The size should be within ± 5% of the indicated value of the width and length. Appearance medical pad should be dry, clean, no mildew, surface leveling does not allow cracks, holes and other defects.
5.Tray
Note:
1.Do not use packaging damaged or damp, please use;
2.This product is disposable, reuse is prohibited and destroyed after use;
3.Product should be replaced in time after wet or dirty.
4.This product is limited to medical staff use.
Photos:
Scope of application:
For medical staff for the diagnosis and treatment of stomatology patients.
Usage:
1.After opening the package, remove the various devices in this product.
2.Take appropriate instruments for diagnosis, treatment of the oral cavity, and protection of patients and medical staff.
Product performance:
1.Oral mirror:The surface should be smooth, without front edge, burrs, cracks, the mirror should be smooth and clean, the image without obvious deformation phenomenon. The handle and lens should be firmly connected without loosening phenomenon. The dimensions shall be ± 20% of the nominal value.
2.Dental probe:The maximum size and total length should not be greater than 178mm. The surface of the external tooth probe handle should be smooth, without impurities, spots and cracks. The tooth probe tip should be smooth and without burr. The probe tip of the firm teeth should be firmly connected to the handle.
3.Dental tweezers:The size shall be ± 20% of the nominal value. The appearance should be smooth, without impurities, without obvious injection defects. Solid tweezers body and tweezers tip should be firmly connected. After stressing the middle of the dental forceps,the forceps tip should match each other.
4.Bib:The size should be within ± 5% of the indicated value of the width and length. Appearance medical pad should be dry, clean, no mildew, surface leveling does not allow cracks, holes and other defects.
5.Tray
Note:
1.Do not use packaging damaged or damp, please use;
2.This product is disposable, reuse is prohibited and destroyed after use;
3.Product should be replaced in time after wet or dirty.
4.This product is limited to medical staff use.
Photos:
content is empty!